Accessories for
Gas Handling & Purification System |
 |
|
 |
Stainless Steel Tubing :
- 1/8" Stainless Steel Tubing with color sleeves for identification of Gas Line (per mtr)
- 1/4" Stainless Steel Tubing with color sleeves for identification of Gas Line (per mtr)
- 1/16" Stainless Steel Tubing (Per 10 Meter) Make : SGE-Australia
Manifold System :
Supply with facility to connect cylinder having Cylinder Valve and supplied with
wall mounting bracket. Suitable connection for Manifold are 1/4"BSP(M) for
Flexible Tail Pipe & 5/8" BSP (F) RH/LH for Cylinder Regulator.
(Without Tail Pipe & Regulator)
- One Cylinder Manifold
- Two Cylinder Manifold
- Four Cylinder Manifold
|
| |
 |
Pigtail Pipe :
S.S. Braided Flexible Tail Pipe inside Teflon with suitable end connectors
18mm Long 1/4" BSP (F) x 30mm Long 5/8BSP(M) RH/LH Bolt along with
64mm long 1/4" BSP Bolt 4.6mm drill. |
| |
 |
Cylinder Wall Mounting Bracket :
Cylinder Wall Mounting Bracket with welcrow for holding One Cylinders |
| |
 |
Powder Coated Metal Powder Coated Casing Capping for laying tubes
- Size : 35mm x 35mm (per meter)
- Size : 35mm x 65mm (per meter)
- Size : 35mm x 100mm (per meter)
Alternatively
PVC Casing Capping for laying tubes |
| |
 |
Flash Back Arrestor with NRV |
| |
 |
Inline Micro Particulate Filter, Micron Size : 0.5 Micron |
| |
 |
Double stage Cylinder Regulator
Double Stage Cylinder Pressure Regulator with Chrome Plated Brass Body /
Stainless Steel 316 body with Stainless Steel SS-316L Diaphragm & Wika - Make
Pressure Gauge at Primary and Secondary Side having 63 mm Dial size for
Hydrogen / Nitrogen / Zero Air / Helium / Argon / Acetylene Gas Line.
Supplied with Dust Frit at Inlet Bull-eye Connector.
2 2 Primary Gauge : 0-280 Kg/Cm , Secondary Gauge : 0-12 kg/Cm
Cylinder Pressure Regulator with Heater for N2O / CO2 is available |
| |
| |
|
