View More
- pH Range : -2.000 to 20.000 pH
- Resolution : 0.1 / 0.01 / 0.001 pH
- ORP - mV / RmV : ± 2000.0
- Temperature Range : -5.0 to 130.0°C
- Temperature Calibration : Onsite by users with in-built software
- Customized slope (User Selectable)
- Multipoint Calibration
- Auto Buffer Recognition
View More
- pH Range: -1.000 to 15.00 pH
- Resolution: 0.01 pH
- Temperature Range: 0 to 130.0°C
- Temperature Calibration: Onsite by users with in-built software
- Slope: 80 - 120%
- Auto Buffer Recognition
View More
- Moisture Estimation by Volumetric Method
- Better than 50 ppm to 100% (depends upon type of sample)
- Auto Flushing & Auto Drain
- Onsite Volume Calibration / Validation
- Weight Entry - 0.1 / 0.01 mg & transfer of weight
View More
- Acid / Base Titration
- Aqueous / Non-Aqueous Titration
- Amperometric, Redox, Chelatemetric & Precipitation Titration
- Argentometric for Chloride, Bromide, Iodide and Cyanide
- Complexometric titration such as EDTA titration for metal ion estimation
- Lubricant and Transformer Oil Analysis – TAN and TBN (ASTM procedure)
- Silver assay for hallmarking
View More
- Temperature Range : +5°C above ambient to 400°C
- Heating Rates : 0.1 to 20.0°C/min
- Three different sample analysis of different temperature in single run
- Recording of melting pattern can be viewed in CapillaryVIEW.
View More
- Temperature Range: +5°C above ambient to 300°C
- Readability: 1.0 OR 0.1°C
- Onsite with calibrated thermometer OR by Pharmacopeia Standard
- Heating Rate After Set Point: Approx. 1.0°C/min
View More
- Element Range : Na, K, & Li : 1-200 ppm, Ca : 15-300 ppm, Ba : 50-3000 ppm
- Sensitivity : Na: 0.5 ppm, K : 0.5 ppm, Li : 0.5 ppm, Ca : 15 ppm, Ba : 50 ppm
- Unit of Measurement : ppm, mg/L, meq/L and mmol/L
- Calibration : Up to five standards per element with curve fitting software in built with Instrument.
- Calibration of Sample : Multi elements in single aspiration OR one by one.
View More
- Technology : Latest IGBT Based
- Temperature Range : 5°C above ambient to 80°C
- Transducer Frequency : 33 ±3 KHz
(25, 40 KHz will be available optionally)- Auto Degassing : Yes, user adjustable time
- Display Frequency : Yes
View More
- Technology : Latest IGBT Based
- Temperature Display: 5°C to Room Temperature
- Temperature Controlling: 5°C to 2°C below Room Temperature
- Compressor: In-built with system
- Transducer Frequency : 33 ±3 KHz
- Auto Degassing : Yes, user adjustable time
- Display Frequency : Yes
View More
- Speed : Variable from 20 to 70 RPM
- Timer : Variable from 1 sec. to 9 hrs. 59 min 59 sec.
- Counter : 1 to 9999 revolutions
- Weight Transfer : Possible through RS-232 port (From Balance to Friability)
- 10° Tilt : With Audio Visual Alert Message
- Power Failure Detection : Un-interrupted tablet testing after power resume
View More
- Maximum Vacuum Level : Better than 625 mm of Hg
- Vacuum Gauge : Digital Display by user friendly touch pad
- Auto Release of Vacuum : Yes – after completion of Vacuum Time
- Calibration : With NABL Certified Standard Digital Vacuum Gauge
View More
- No. of Station : 1) USP1 (300 taps per min.)
2) USP2 (250 taps per min.)
3) USP3 (50 - 60 taps per min.).- Stroke Height : 14 mm + 2mm / 3mm + 0.2 mm
- Stroke / Minute : 300 ± 15, 250 ± 15
View More
- Capacity of Nitrogen Gas : 300 ml/min & Zero Air : 2000 ml/min at 6 Kg/cm2, Model : NZA-2300 (Suitable for two/three GC)
- Capacity of Nitrogen Gas : 800 ml/min & Zero Air : 4000 ml/min at 6 Kg/cm2, Model : NZA-4800 (Suitable for five/six GC)
- Capacity of Gas : 2000 ml/min at 6 Kg/cm2 Model: N-2000
View More
- Capacity of Gas: 300 ml/min at 6 Kg/cm2 Model: N-300 (Suitable for two GC)
- Capacity of Gas: 800 ml/min at 6 Kg/cm2 Model: N-800 (Suitable for five GC)
- Capacity of Gas: 2000 ml/min at 6 Kg/cm2 Model: N-2000
- Capacity of Gas: 4000 ml/min at 6 Kg/cm2 Model: N-4000
View More
- For Hydrogen, Nitrogen, Zero Air & Helium Gas Line
- Model : GHS-Plus-01 (For Any One Gas)
- Model : GHS-Plus-02 (For Any Two Gases)
- Model : GHS-Plus-03 (For Any Three Gases)
- Model : GHS-Plus-04 (For Any Four Gases)
View More
- Pressure Range : ≤200 kg/cm2
- Resolution : 0.5 kg/cm2
- Number of Gas : Suitable for Maximum Eight Gas Line
- Signal Connector for Transducer : Water proof Male & Female Connector.
- Visual Alarm : Red and Green LED Light.
View More
- Laboratory Funiture
- Laboratory Fume Hood
- Laboratory Stand Alone
- Laboratory Utilities
We have not faced any problem in ANALAB Gas Purifier System for our Gas chromatograph which we are using since last five years. This purifier gives excellent performance and we are satisfied with the system.
Working performance of Gas handling manifold and purification system for Hydrogen, Air, Nitrogen and Argon Gas line for Gas chromatography labs in Central laboratory and ACN / ACR Labs supplied by ANALAB is very good and Analab service also very good.
Analab Scientific Instruments Pvt. Ltd. Vadodara has supplied and installed Microprocessor based pH/ mV/Temp. Analyzer with FIVE POINT Calibration system (Total 04 Nos) to our Bio Analytical Department, Bio Evaluation centre since May 2007, which we are using very regularly and found performance excellent and results are generated as per regulatory
We are using ANALAB Gas Purification system with all accessories for our GC M/c. Performance of the system and Service provided by ANALAB are satisfactory.
Plot No. 361, Sayajimarket,
N. H. No. 8 By-Pass, At & Post : Sayajipura,
Vadodara - 390019, Gujarat, INDIA.
Phone: +91-9714503393 | +91-7574855256
E-Mail: info@analab.co.in