Tablet Hardness Tester (4IN1)

Model : µTHCal50 | Make : ANALAB | HSN Code : 90248091

Supplied with Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.

Technical Specifications

• Display of Results : Thickness, Diameter, Hardness and weightData
• Testing range thickness and Diameter : 0.5 - 35.00 mm in samemechanism with measuring units either in mm/inch (No need For extension module for thickness measurement) with accuracy ofbetter ± 0.05 mm
• Hardness : 5.0 - approx. 500 N (Newton) with accuracy of 1 N andalso 800N option
• Force Rate : Adjustable for linear force / linear speed increase
• Sample Throughput : Throughput is approximately 6-10 samplesper minute.
• Number of tests for statistics : Up to 100
• Report Formation : As per GLP Compliance
• Method/Protocols : 10 different drug protocols can be saved.
• Cal. Procedure : Needs 10 mm reference block and 10 kg reference weight (certified)
• Display : Graphic with Pixels of 240 X 128.
• Keyboard : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS
• Pharmacopeia Complies : As per USP-1217 and EP-2.9.8
• Hardness Range : 5-500N (800N Option Available)
• Hardness Accuracy : >1N
• Diameter and Thickness Range : 0.5 - 35 mm
• Diameter Accuracy : >± 0.05 mm
• Measuring Units : Thickness and Diameter in either mm or inches
• Measurable Units : N (Newton) KP (Kilo Pond, 1KP = 9.81N) SC (Strong Cobb 1KP = 1.43Sc)
• Force Rate : Constant (Linear) Force or Constant (Linear) Speed
• Number of Test for Statistics : Up to 100
• Stored Methods : Up to 10
• Calibration Procedure : Requires 10mm Reference block and 10Kg Reference Weight (certified)
• Load cell Linearity : Calibration with certified weight 5, 10, 15 kg
• Distance Validation : 10mm Cert. Block (for thickness anddiameter) RS-232 interface with external Balance connectivity, Mettler, sartorius or Shimadzu analytical balance.
• “Adjustment Free” Testing Jaws : Requires no adjustments ofthe test jaws that are designed to suit all tablet shapes and Sizes with a unique grooved design for proper alignment of each tabletbefore testing.
• Over Range Alert : "Alert" will display if the tablet or sample isabove the defined hardness range with the option to continue or abort test.
• Calibration Technique : No Tilt (User Friendly)
• Distance Validation : 10 mm Certified Block (For Thickness andDiameter)
• Load cell Linearity : 3 point Linear Calibration with certified weight (5, 10, 15 Kg)
• Load cell Diagnostic Check : Yes (Check the Load Cell signal falls within range before making any further Calibration)
• Self-Test : Yes
• Fault Localization : Yes (Text Format)
• Load cell Over load Protection : Yes
• Password Protection : Yes (For Advance Settings)
• Factory Setting Reset : Yes
• Real Time Clock : Yes
• Number of Tablet Detection : Yes
• Tracking Deletion : Yes
• On Screen Statistic View : Yes
• Printer Interface : Serial & Centronics Parallel Port – Dot Matrix
• Interface Port : USB Type A (2), USB Type B,LAN
• Serial Interface : For Balance Connection of Mettler, Sartorius ORShimadzu Analytical Balance
• Printer Selection : 40 / 80 column (Printer have to procure optionally)
• Dimensions : Approx. 360mm x 570mm x 370mm (D x W x H)
• Packaging Dimensions : Approx. 480mm x 680mm x 500mm (D xW x H)
• Net Weight : Approx. 8kg
• Gross Weight : Approx. 13kg
• Power Supply : 230VAC ± 10%, 50/60 Hz